Thread: No apparent signal sent from PWM 10 [LabVIEW/also slightly electrical]
View Single Post
  #3   Spotlight this post!  
Unread 15-02-2013, 19:03
eat4fun's Avatar
eat4fun eat4fun is offline
sudoer
AKA: Eric Bryce
FRC #1325 (Inverse Paradox)
Team Role: Leadership
  
Join Date: Dec 2010
Rookie Year: 2010
Location: Mississauga, Canada
Posts: 9
eat4fun is an unknown quantity at this point
Re: No apparent signal sent from PWM 10 [LabVIEW/also slightly electrical]
Quote:
Originally Posted by Kevin Sevcik View Post
Try swapping your 37-pin ribbon cable with a new or different one. You might have a bad pin or wire on the cable.
When I first observed the problem we were using a ribbon cable like that which comes in the latest KoPs, I swapped it out for a serial cable like that which came in the older kits of parts to no avail.

EDIT: the digital module seems to be the culprit. It has been swapped-out and now works.
Last edited by eat4fun : 15-02-2013 at 23:43.
Reply With Quote