Quote:
Originally Posted by choas5000
how do you use them
|
From the
PG-71 page on the AndyMark website, which also lists physical and performance specifications:
If you wish to use it in another gearbox, use the recommended
16 tooth gear.
If you wish to use it to drive chain, use the recommended
16 tooth sprocket.
If you wish to use it to direct drive something, use the recommended
hub.
If you wish to mount it to a surface perpendicular to the output shaft, use four M4x0.7 screws.
If you wish to mount it to a surface skew to the output shaft, use the
recommended gearmotor bracket and the aforementioned screws.
I've put in an informal request for them to offer their gearmotors with a hex output shaft; maybe that option will be around for the 2014 season.
Also, treat the back end with care. Our team has a nasty habit of accidentally snapping off the spade connectors.