|
Controls don't respond
Hello, I'm having trouble controlling my robot. I've written the controls. I've checked all the wiring connections. I've had my program verified as working. My IP settings are correct. My CRIO is imaged. I'm communicating with the robot. The joystick is calibrated and the driver station picks up the inputs from it. However, whenever i try to enable teleop, it simply pulses the motors and then cuts off. It doesn't respond to any assigned inputs. It worked previously when there were less controllers hooked up to it. (only using jaguars). However, when I try to run them all at once, none of them respond. Please help!
|