|
Re: No Robot Code
"No robot code" means that the Driver Station cannot communicate with a robot program running on the cRIO. If you are connected and the "Communication" indicator is green, then it means no code is running on the cRIO.
It can happen if no code was loaded before the system was booted. How did you load the code onto the cRIO?
It can also happen if code is present but the NO APP switch is turned on. If you are using an 8-slot cRIO with physical switches, make sure NO APP is OFF. If you have a 4-slot cRIO, use the imaging tool to make sure the virtual NO APP switch is off.
|