03-04-2013, 14:04
|
 |
no bag, vex only, final destination
AKA: Pinecone
 FRC #0228 (GUS Robotics); FRC #2170 (Titanium Tomahawks) Team Role: Mentor
|
|
Join Date: Dec 2008
Rookie Year: 2006
Location: Glastonbury, CT
Posts: 7,713
|
|
|
Re: Shooter Help for 2nd Year Team
Side loads were not a problem for us this year direct driving off of CIMs and mini-CIMs with a very similar shooter. As long as your compression isn't insane (10.5 inches from tip of wheel to side wall is what we used) there shouldn't be any problems.
One tip I would give you guys to get a more accurate shot that curves less. It looks like your shots hook right, away from your wheels. We found this curve was a result of the frisbee being compressed but not constrained properly. The edge of the frisbee closest to the wheels was allowed to rise up, and thus discs left the shooter in a crooked manner. If you have some kind of physical guard (e.g. a piece of low friction plastic) mounted right above the shooter wheels to prevent this "popping", you may get a more consistent shot.
__________________
Mentor / Drive Coach: 228 (2016-?)
...2016 Waterbury SFs (with 3314, 3719), RIDE #2 Seed / Winners (with 1058, 6153), Carver QFs (with 503, 359, 4607)
Mentor / Consultant Person: 2170 (2017-?)
---
College Mentor: 2791 (2010-2015)
...2015 TVR Motorola Quality, FLR GM Industrial Design
...2014 FLR Motorola Quality / SFs (with 341, 4930)
...2013 BAE Motorola Quality, WPI Regional #1 Seed / Delphi Excellence in Engineering / Finalists (with 20, 3182)
...2012 BAE Imagery / Finalists (with 1519, 885), CT Xerox Creativity / SFs (with 2168, 118)
Student: 1714 (2009) - 2009 Minnesota 10,000 Lakes Regional Winners (with 2826, 2470)
2791 Build Season Photo Gallery - Look here for mechanism photos My Robotics Blog (Updated April 11 2014)
|