|
Re: PWM cables type
Every PWM cable I've worked with fits the Talons fine. It's designed to be a slightly tight fit so they don't come loose easily.
Some RC type cables have an alignment tab that's designed to make sure the cable can only be inserted one way. The VEX cables (the entire Vex system actually) has this feature for correct alignment. The Talon has a slot for this alignment tab, the Victor (at least the 884, I haven't checked the 888) does not have a slot. I usually cut the tab off with small side cutters when I need to insert the cable into a Victor. The KOP cables (at least from this year) did not have this feature and should have fit the Victors.
__________________
Kettering University - Computer Engineering
Kettering Motorsports
Williams International - Commercial Engines - Controls and Accessories
FRC 33 - The Killer Bees - 2009-2012 Student, 2013-2014 Advisor
VEX IQ 3333 - The Bumble Bees - 2014+ Mentor
"Sometimes, the elegant implementation is a function. Not a method. Not a class. Not a framework. Just a function." ~ John Carmack
|