[KrazyCarl92]

Here are a few of the things that we did this year that might be of interest to you:

-CAD modeling of the entire robot. This was particularly useful for about 7 complicated design constraints on our arm geometry that the collector, conveyor, and shooter mount to.
-Water jet cut sheet metal for our shooter tray and our hooks. We didn't really take full advantage of using sheet metal (no bends we made), but it is a significant part of how our robot came together this year.
-CNC lathe work on the pulleys for our polyurethane belting.
-Manual lathe work and bridge port mill work on many parts of our drive system in particular.
-Welded aluminum tube frame.
-Hex push broaching.

Any other questions just let me know or stop by 20's pit in Archimedes!
Good luck with generating interest.