Thread: Festo? Or SMC
View Single Post
  #3   Spotlight this post!  
Unread 29-04-2013, 15:40
zsm150's Avatar
zsm150 zsm150 is online now
Registered User
AKA: Zack Moore
FRC #0314 (Big Mo)
Team Role: Mentor
  
Join Date: Apr 2013
Rookie Year: 2008
Location: Novi Michigan
Posts: 43
zsm150 is a splendid one to beholdzsm150 is a splendid one to beholdzsm150 is a splendid one to beholdzsm150 is a splendid one to beholdzsm150 is a splendid one to beholdzsm150 is a splendid one to beholdzsm150 is a splendid one to behold
Re: Festo? Or SMC
Quote:
Originally Posted by ayeckley View Post
Assuming you are asking me:

Well, the main difference I've experienced is that SMC valves always work and the Festo model from 2008 didn't - however: the model that Festo currently donates is completely different than the 2008 model, so it's kind of comparing apples and oranges. I've been casually monitoring the solenoid valve discussions here over the years and I haven't heard of any folks reporting any non-user-induced problems with the current KOP Festos (which are very similar in design and appearance to the SMC SY-series by the way).

So, yes I would recommend the SMCs. Would I use the current KOP Festo valves if I didn't have SMCs available? Yes. Which would I buy if I had neither? SMC, primarily because I've never had a bad experience with one while cost is on-par with the Festos. Hope that helps...
Thanks that helps im just loling for next year to help assure my team reliability Ill order and test those MAC and SMC's Thanks!