Thread: Control Board
View Single Post
  #4   Spotlight this post!  
Unread 31-01-2003, 11:28
Mr. Ivey's Avatar
Mr. Ivey Mr. Ivey is offline
Mark Ivey
AKA: Mark
no team
  
Join Date: Sep 2002
Rookie Year: 2000
Location: Raleigh, NC
Posts: 171
Mr. Ivey is a glorious beacon of lightMr. Ivey is a glorious beacon of lightMr. Ivey is a glorious beacon of lightMr. Ivey is a glorious beacon of lightMr. Ivey is a glorious beacon of light
Send a message via AIM to Mr. Ivey
Yeah, we've tested out the OI dashboard, but it really isn't that great, we wanted to make something that shows Scott what the robot was doing, I was contemplating using the gyro sensor to relay where the robot is on an X,Y,Z plane, and to show a color display of the temperature of the fuses, relays, shows the speed in a color display and in a percentage, and gives off a warning sound when a motor is about to trip. Also we are trying to make a HUD, we are finding out that it really isn't easy, especially when you have 2 displays, but I won't go into that.
~Mr. Ivey
__________________
When you tell a student not to do it, you shouldn't do it. Or else you will wind up with a 3/8" drill bit in your finger... Like I did...