Quote:
Originally Posted by Adrian Clark
Is the whole weight of the robot supported by that one bearing? TBH that's absolutely terrifying. I would't be surprised if the jerky movements of the bot make that bearing pop right out.
|
As of now it is, I realize that should be changed and will find some way to do so.
Quote:
Originally Posted by Adrian Clark
How is your turning pulley mounted to the module? In this render it appears to be mounted to the drive shaft, but that can't be right.
|
There are three holes drilled into the pulley and the module. It will be bolted together so they both move.
Quote:
Originally Posted by Adrian Clark
What's holding your miter gears and sprocket in place? What keeps the gears from sliding on their shafts, and what keeps the top gear from sliding down?
|
This was one of the problems I faced originally. My best guess is super gluing the key shaft, but I really do need to find a better solution.
Quote:
Originally Posted by Adrian Clark
How do you plan on making the turning module frame? Is a solid piece of metal or do you plan on making it in multiple parts?
|
Sadly, I do not have the resources to make this, but if it were to be made I would either use one solid piece or make multiple parts and try welding it together.