|
Re: Configuring OpenCV with PandaBoard
Quote:
Originally Posted by ekapalka
If you can do it on a Raspberry Pi, you can usually do it on a BeagleBoard, PandaBoard, ODROID, Gumstix, or other embedded system running Linux.
|
1706 used the ODroid X2 board. The environment was QT, and we sent a udp message to the cRIO. I only sent him 2 variables, distance, and rotation needed to line up with the center of the 3 point target. And just to clear things up, the ODroid X2 is much better than the pandaboard and raspberry Pi. Of course that is very opinionated 
__________________
"You're a gentleman," they used to say to him. "You shouldn't have gone murdering people with a hatchet; that's no occupation for a gentleman."
|