|
The pressure switch supplied this year opens at 115 psi and closes at 95 psi. You should be able to wire it via one of switch inputs 1 thru 3, to use it for the normal programming of the compressor, and to have the OI LED for that switch come on while the pump is on.
If the pressure in your low pressure system is down to 35 psi (from 60 ?), it means your high pressure (before the regulator) reservoir must be down to 35 psi, too. The pressure switch in the H.P. system will close, and thus both the compressor, and the appropriate OI LED would turn on.
Last edited by Lloyd Burns : 03-02-2003 at 02:02.
|