|
Re: pic: Introducing BarBox: My First Attempt at Gearbox Design
Quote:
Originally Posted by Adrian Clark
Like Adam said, using an off the shelf shaft is a great idea. But I would recommend using a .375 ID 1.125 OD bearing from andymark so you can make the plates identical.
|
I haven't thought of that... Thanks for the tip. I'll try and incorporate this in the design.
__________________
Team FRC#2212 The Spikes, 2011-...
Builld leader 2013
Drive coach 2012-2013
Mentor 2015-...
|