Quote:
Originally Posted by techhelpbb
Aside to this:
I am curious where FIRST FRC stands on CAN/RS-232 interfaced systems. I know you are not allowed to control the Jaguars directly from something other than the cRIO but I personally have not seen anyone try to get inspected a robot that has a custom circuit on it that sends data over CAN to the cRIO and lets the cRIO echo back instructions to the Jaguars. I have also not seen anyone setup a multi-drop serial network which is entirely possible from an RS-232 port (see RS-422/RS-485).
|
In 2012, we used a 6 axis IMU sensor that interfaced to the serial port of the CRIO. No problems inspecting.
Here is a picture of the interface box:
http://www.flickr.com/photos/teamthr...57629273847264
The sensor worked very well, but we kept blowing the voltage regulators on the circuit board. Because of this problem, we had to disable and by-pass the IMU sensor after it kept failing due to power problems.