|
Stop the motor from Falling out
We never had this problem but we did have a problem with the drill motor being too loose in the cradle. We reorientated it such that the electrical leads are on the top and the bottom if you lie the unit flat on a table. This helped to wedge it in there. Also make sure that you securely fasten the rings that fit over the top of the unit. This should prevent accidental loss of any drill motors.
__________________
Andrew Parks
CrescentSchool Robotics
Co-Construction Head and Driver
Team 610
2002 Regional Champs
2002 Engineering Inspiration
2003 Regional Chairman's Award
|