Thread: [HELP] cRIO not imaging as it should be
View Single Post
  #1   Spotlight this post!  
Unread 10-10-2013, 17:23
domingocool domingocool is offline
Programmer
FRC #4645 (X-Machina)
Team Role: Programmer
  
Join Date: Oct 2013
Rookie Year: 2012
Location: Chicago, IL
Posts: 14
domingocool is an unknown quantity at this point
Question [HELP] cRIO not imaging as it should be
So, we've been having trouble imaging our cRIO for two days and can't seem to figure out why. We periodically get the two blinks on the status lights so we installed NI MAX 5.5 and re-formatted the cRIO and re installed the software with all the add-ons. We set out LAN IP to 10.46.45.5 and the subnet mask to 255.255.255.0. When we try to image it it still doesn't image(or at least starts but puts an error(Error 7)). Also the modules never show up on the Imaging Tool nor are the little switches usable. We've tried everything we feel that we can so any help would be awesome. Thanks.