Thread: [HELP] cRIO not imaging as it should be
View Single Post
  #3   Spotlight this post!  
Unread 10-10-2013, 18:26
Tom Line's Avatar
Tom Line Tom Line is offline
Raptors can't turn doorknobs.
FRC #1718 (The Fighting Pi)
Team Role: Mentor
  
Join Date: Jan 2007
Rookie Year: 1999
Location: Armada, Michigan
Posts: 2,535
Tom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond reputeTom Line has a reputation beyond repute
Re: [HELP] cRIO not imaging as it should be
Quote:
Originally Posted by domingocool View Post
So, we've been having trouble imaging our cRIO for two days and can't seem to figure out why. We periodically get the two blinks on the status lights so we installed NI MAX 5.5 and re-formatted the cRIO and re installed the software with all the add-ons. We set out LAN IP to 10.46.45.5 and the subnet mask to 255.255.255.0. When we try to image it it still doesn't image(or at least starts but puts an error(Error 7)). Also the modules never show up on the Imaging Tool nor are the little switches usable. We've tried everything we feel that we can so any help would be awesome. Thanks.
I would start with the basics. Can you go to a command prompt and ping the crio? Let's make sure you have communication first.

Also, you are connecting your ethernet cable directly to the crio from the computer, right?