|
Re: Communication issues?
The fact that the communication and robot code lights were on makes me strongly suspect that communication between the cRIO and the driver station is not the issue.
Questions:
- You said the problems started when you downloaded new code. Are you sure you put the correct, and functioning, code on the robot?
- Does the Robot Signal Light show the correct slow blink when the robot is enabled for teleop? (on for approx. 2 seconds, off for approx. 0.5 seconds)
- Do you get any messages in NetConsole?
__________________
FRC 2046, 2007-2008, Student member
FRC 1708, 2009-2012, College mentor; 2013-2014, Mentor
FRC 766, 2015-, Mentor
Last edited by RyanCahoon : 10-10-2013 at 22:01.
Reason: Removed some questions, add another
|