|
Re: 233 telescoping arms how do they work?
Quote:
Originally Posted by Nuttyman54
For #25 chain, you can fit #4 screws through the gaps between the rollers to fix it to something, although I don't know if this is how 233 does it or not. Another method is to drill a hole in the fixed structure that one end of a masterlink fits through.
|
I've also used #4 Screws to fix #25 chain before, it works just fine when done right but can be a bit tricky considering the size of both the chain and the screws.
233, in 2011 at least, machines a part that appears to 'look' like a #25 chain link at either end and uses that to fix the chain to the stages. Here's a few pictures on their flickr.
http://www.flickr.com/photos/thepinkteam/5787028180/
http://www.flickr.com/photos/thepinkteam/5787033770/
http://www.flickr.com/photos/thepink...n/photostream/
__________________
-Dustin Benedict
2005-2012 - Student & Mentor FRC 816
2012-2014 - Technical Mentor, 2014 Drive Coach FRC 341
Current - Mentor FRC 2729, FRC 708
Last edited by thefro526 : 21-10-2013 at 14:35.
|