To see the devices connected to your laptop, open a Windows command window (go to Start and type "cmd" into the search at the bottom) and type:
arp -av
The wireless AP will show up connected to your PC's wireless adaptor.
Wireless settings should be:
- Enable Wireless = checked
- Wireless network name = 4692 (but can be anything)
- Security Mode = none
- Wi-Fi Protected Setup Enabled = NOT checked
- Wireless MAC Cloning = NOT checked
Network settings should be:
- LAN Connection Type = Static IP
- IPv4 Address = 10.46.92.1
- Subnet Mask = 255.0.0.0