This may be useful:
Step 1 - Login to the web management
Open the web browser and type the default IP address of the AirOS powered device
http://192.168.1.20 into the browser address field. You will be prompted to enter the default administrator login credentials:
User Name: ubnt
Password: ubnt
After successful administrator log on you will see the Main page of the web management interface.
There should be a way to see the signal strength -- if you had access to the antenna, this could help to make sure it is aligned optimally.
One final thing, it can be confusing to tell when tracert is first trying to ping an address vs. when it has done so and gotten a response, or has timed out. This is a good reason to use ping in isolation as a double check.