[wilsonmw04]

Originally Posted by kelsey.m

Okay, still no movement from the joysticks...
We're starting to worry that we've missed something really basic. We've been reading/watching various tutorials but haven't stumbled across any solutions yet.

Following everything we're reading about the test function and no response.

- Are we correct that we can pull up default code, input our IP address, change jaguars to talons and download? Or is there something else critical that needs to happen?

- All updates are installed on the computer

- The cRIO is now imaged

- The talons are still fast blinking orange on one and red/orange alternating fast blinks on the other. We attempted to calibrate and didn't observe any change (it didn't give the red error or green success, just kept with the fast blinking).

- The test mode lets us see that it is measuring joystick movement, just the robot doesn't respond...

Again, thanks so much for any advice and input!

Greetings,
We ran into this same problem last night. Try flipping your PWM's in your controller. Your issues may not be in code, but physical. If the PWMs are in backward you will be the symptoms you are describing