Quote:
Originally Posted by kelsey.m
- The talons are still fast blinking orange on one and red/orange alternating fast blinks on the other.
|
The [url=http://www.crosstheroadelectronics.com/Talon.html]Talon User Manual[/url shows that red/orange is a fault.
Quote:
Talon SR – The Talon SR has an additional LED state that blinks
red/orange when a fault state is detected. A fault can be caused by
one of three things; under voltage (< 3.3V DC), over temperature
(>170 degrees C) or a shorted output transistor. During a fault the
output of the Talon is disabled until the fault condition is no longer
present.
|
The fault is likely internal to the Talon, or it could have been induced by miswiring. I would disconnect that Talon, at least until you get your issues resolved with the other Talon.