So my team has used CAN for 3+ years, but we've never used a 2CAN before. We recently decided to try one out and got a 2CAN 2.0, however when we installed it (hardware, firmware update, and plug-in) and tested CAN functionality with our unmodified code, we got a fast red strobe on the status light and the web dashboard indicated there was no CAN traffic.
We're pretty sure this isn't a wiring issue since we just added the 2CAN into our 2013 robot, which worked with the serial adapter.
We have:
- 2CAN 2.0 (fw ver_2.28)(Plug-in was the default plug-in already on the cRIO)
- Black Jaguars (pretty sure they are v107)
- 4 Slot cRIO
Any help would be greatly appreciated!