|
Re: [FTC]: [FTC] Looking for input on mounting NXTs
Sure! I've attached the two parts as STEP files, let me know if you'd prefer a different format.
Keep in mind that these parts were designed for machining, not 3D printing, so there may be things that require tweaking, I don't know much about designing for 3D printing, so I don't know for sure.
I made all the holes to the tap-drill size for #6 screws, so once it's printed, running a screw into them should self-thread them.
You should be able to edit the sketch for the team number on it to your own pretty easily (I hope). If not, let me know!
Also keep in mind that I haven't actually made this thing, so I'm not %100 sure that it will actually work, but I'm pretty confident.
__________________
FRC #1306 - BadgerBOTS - Mechanical/Machining/Safety/Marketing Mentor
FTC #6806 - Ratchet Robotics - Head/Founding Mentor
2010 - Wisconsin Regional Chairman's Award Winner - Wisconsin Regional Quarter-finalist - Curie Division #5 Seed, Quarter-finalist
2011 - Wisconsin Regional Innovation in Control Award Winner - Wisconsin Regional Quarter-finalist
2012 - Wisconsin Regional Engineering Inspiration Award Winner - Wisconsin Regional Semi-finalist
2013 - Wisconsin Regional Chairman's Award Winner
|