Quote:
Originally Posted by AlecS
Yes, each Versa-Block has a 1/16" offset built into it, which is consistent with the notch on the top of the block. By orienting the blocks, you can achieve a 1/8" drop in a 6wd, 8wd, or 10wd.
In a typical 8wd, you would position the 4 outer wheels with the notch down, and 4 inner wheels with the notch raised.
|
Thank you for clearing that up.
Are there pre-drilled holes in the outer walls for the different drive train configurations like 6 wheel, 8 wheel, etc?