Thread: 3V3 digital signal to the cRIO
View Single Post
  #4   Spotlight this post!  
Unread 27-12-2013, 13:40
yash101 yash101 is offline
Curiosity | I have too much of it!
AKA: null
no team
  
Join Date: Oct 2012
Rookie Year: 2012
Location: devnull
Posts: 1,191
yash101 is an unknown quantity at this point
Re: 3V3 digital signal to the cRIO
I would say, if you have a two way connection with one direction per line, the RPi tx can be directly connected to the rx on the crio. However, you would need a resistor in the rx of the pi. Are you using i2C or SPI, etc? I use a 5v UART connection with my pi to access terminal via serial.

5v requires 2v5 to register a 1.