[yash101]

Originally Posted by Jon Jack

We use an adhesive backed silicone sheet (McMaster P/N: 8622K41). We cut the sheet to the size of the cRIO and stick it on. You can do this to several cRIOs with one $38 sheet.

Another thing we do is use nylon fasteners. We do this for a few reasons:

1. Using plastic fasteners on the cRIO helps further isolate it from the baseplate.
2. You can trim all the fasteners to length (after they've been installed) with a pair of flush cutters.
3. We're tapping into 1/8" thick aluminum and the threads on the nylon screw will give before we can strip out the tapped hole in the baseplate.
4. They're light.

Haha Ya. We screw the cRIO into the wood, but velcro everything else!