Quote:
Originally Posted by Al Skierkiewicz
Mike,
125 psi is the working pressure at which integrity with pressure is guaranteed. It does not relate to mechanical failure of the device with no load.
|
Hi Al, i understand that
Quote:
Originally Posted by Al Skierkiewicz
125 psi is the working pressure at which integrity with pressure is guaranteed.
|
I have never seen any documentation from the manufacturer or anyone else for that matter suggesting that this guarantee is under the condition that there is a minimum load applied to the cylinders. A mechanical failure of the cylinder, operated as intended and within the specified psi, unmodified and undamaged/not worn, would be a product or design failure by the manufacturer. These cylinders are designed to be operated under the specified pressure and are not subject to the condition of a minimum load to be safe. Yes they will actuate very fast (especially smaller diameter cylinders) but especially when restricted to 60psi (again less than 50% working pressure) we are well within the scope of intended and safe use specified by the manufacturer.