|
Re: cRIO won't reboot during imaging
I recommend following the guide at this link every time you re-image the cRIO, every time that I have sat down and followed it exactly I have successfully re-imaged it.
http://www.chiefdelphi.com/forums/sh...44&postcount=9
If you are unsure about needing a crossover cable, have the cRIO and computer connected via a switch or a router (wired connection).
Hope this helps!
__________________
FRC Team 539
Student Member: 2010 Breakaway - 2014 Aerial Assist
Mentor: 2015 Recycle Rush - present
Last edited by DavisC : 12-01-2014 at 21:56.
Reason: Fixed Link
|