Thread: cRIO won't reboot during imaging
View Single Post
  #5   Spotlight this post!  
Unread 12-01-2014, 12:36
wt200999's Avatar
wt200999 wt200999 is offline
Texas Instruments
AKA: Will Toth
FRC #3005 (Robochargers)
Team Role: Mentor
  
Join Date: Mar 2006
Rookie Year: 2004
Location: Dallas, Texas
Posts: 323
wt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud ofwt200999 has much to be proud of
Send a message via MSN to wt200999
Re: cRIO won't reboot during imaging
Our team was having a problem similar to what you are describing. One thing that we noticed it that when you go to the command prompt and type "ipconfig" the LAN adapter connected to the robot had 2 IP address associated with it.

To change this and only have one IP address, go to your TCP/IPv4 Properties, and on the bottom select Advanced...

Delete the extra IP addresses.

When we did this it worked every time. It seems like the tool adds an IP address every time so if this also works for you, you may have to follow these steps every time.

Hope that helps
Reply With Quote