[cedwards]

Thanks for the quick responses.

We checked the PWM cables by removing and inspecting to ensure there was no bending or any other mischief. It all looked good, no plastic no problems. It fit quite snug but well. We also used the same wires and configuration for the 4 Talon MCs and all worked good. We had more trouble getting the PWM into the Talon than the Victors. The Talon started bending one of the PWM pins and we had to straighten and re-insert. We can try bending the PWM pins to make it more noticeable during entry on the Victors.

The digital sidecar is lit with the 3 lights and is fully powered.