Quote:
Originally Posted by wolfspell12
Disconnected from wi-fi, no different. The cRIO imaging tool is not detecting any modules, despite the fact that there are three installed(This is an older style which has room for 8 modules if that matters.)
Code:
C:\Users\gcgh>tracert 10.32.44.2
Tracing route to 10.32.44.2 over a maximum of 30 hops
1 gcgh02 [10.32.44.6] reports: Destination host unreachable.
Trace complete.
C:\Users\gcgh>
Edit: also pinged again with wi-fi disconnected. |
Try to IP Reset the cRIO and then re-image it.