Thread: CRio II will not communicate
View Single Post
  #7   Spotlight this post!  
Unread 14-01-2014, 09:09
1024Programming 1024Programming is offline
Registered User
FRC #1024
  
Join Date: Jan 2014
Location: Indiana
Posts: 43
1024Programming is an unknown quantity at this point
Re: CRio II will not communicate
Quote:
Originally Posted by Tem1514 Mentor View Post
Make sure you have your TCP set to 'use this IP'
and for you it should be '10.10.24.2'

If all else fails, NI support will be able to help you out. I just hope you haven't turned your cRIO's into "bricks"
Our "TCP"? The computer's IP is set to 10.10.24.10. The CRio was originally communicating on 10.10.24.2 (meaning we could ping it and the imaging tool found it and tried to image it). Our present guess is that the IP address of the CRio was somehow changed.

We were unable to download wireshark to search for the device (and this would be our first time using wireshark). So, we decided to ask here first. We will be trying to install wireshark to see if we can find the CRio on another IP address as soon as possible.

Thanks!!