|
Re: Power connectivity diagram Wrong?
The Robot Power Connectivity Diagram is correct for those teams using 12 volt solenoids. For 2013 there were two drawings, one for 12 and one for 24 volt solenoids. You can search for that drawing on archives or I can send you one if you need it. Under the Robot Rules, only one solenoid module can be connected to the 24 volt supply which is also used for the Crio. My recomendation is to "home run" a pair of wires to the PD if your are using 24 volt solenoids. (as opposed to the cRio connector.)
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|