Thread: CRio II will not communicate
View Single Post
  #13   Spotlight this post!  
Unread 14-01-2014, 11:07
TogetherSword8 TogetherSword8 is offline
Registered User
FRC #0888 (Robotiators)
Team Role: Alumni
  
Join Date: Feb 2012
Rookie Year: 2012
Location: Glenelg High School
Posts: 85
TogetherSword8 is an unknown quantity at this point
Re: CRio II will not communicate
Walter, I had the same problem when initially updating my crio. I found the rebooting crio time to abnormally long. I got lucky in that when doing it, I went on here to see if anyone had problems (not yet when i was checking) and I came back 6 minutes later and it was updating again after the reboot. I ran into the same problem as you multiple times, it might just be patience. IFF (if an only if) it takes 15 minutes, force close the program and reboot the power to the crio (waiting 10 seconds after shutting off power before turning it back on) and try it again. I did this 6 times on one of my crios before it worked. Seems to be a bug in the image or imaging software.
__________________
I program a robot. Which means I write code and everyone gets mad at me when something doesn't work, even if I am the only one that knows it doesn't work. The key part to know is that the robot never works.