|
Re: Motor Controller Problems
Five quick things to check:
1. Are your three pin cables inserted in the proper orientation? If not, then you are grounding the PWM pin on the speed controller = no signal.
2. Is your 37 pin cable between the cRIO module and the DSC securely plugged in?
3. Are you properly supplying power to the DSC?
4. What is your RSL output looking like?
5. (I think the answer is yes, but...)Are you enabling your robot at the driver station?
__________________
2013 Alamo Regional Woodie Flowers Finalist Award Winner
2012 Texas Robot Roundup Volunteer of the Year
Texas Robot Roundup Planning Committee, 2012-present
FRC 6357 Mentor, 2016-
FRC 2789 Mentor, 2009-2016 -- 2 Golds, 2 Silvers, 8 Regional Elimination Appearances
FRC 41 Mentor 2007-2009
FLL Mentor 2006
FRC 619 Mentor 2002
FRC 41 Student 1998-2000
|