Quote:
Originally Posted by sst.thad
One more question about the WCP single speed gearboxes. Can we be sure that the CAD files are the correct dimensions for them? It says that the bearing block is 1.5 inch diameter, which the block holes spaced .9375 from the center, and the plate mounting holes 2.25 from the center. We wanted to wait until we have the gearboxes, but we cannot wait that long to weld, so if we can get confirmation that those are the correct numbers coming out of manufacturing that would be very helpful.
Thanks.
|
Thad,
All WCP gearboxes have the shifter/bearing block mount holes spaced 1.875" apart (.9375"). All Plate mounting holes inline with the shifter/ holes are spaced 4.5" apart (2.25"). This allows for swapping of gearboxes in both SS/DS/3 CIM.
-RC