|
Re: Programming Led Light Strips
Not meaning to tell stories on my self, but.......
I find that a high percentage of problems I have had using an Arduino are caused by not getting the connections to the right pin. That is equally true when using a breadboard. One pin off, and the project doesn't work.
In your case, if the Printf statements work, then the code is reaching those lines. It may be as simple as having the Clock and/or Data wires in the wrong place.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|