Quote:
Originally Posted by Tem1514 Mentor
Aside from needing a more powerfully adjuster as the primary 60 psi I would call it as a real no-no since you have no way to prove the maximum 60 psi working pressure is controlled by sensor feed back.
If this was another regulator AFTER the main 60 psi regulator then go for it.
|
Right- pneumatics would be downstream of regulation set-up:
Compressor --> Safety Relief (125 psi) --> Pressure Switch (124 psi) --> Reservoir tank(s) --> Regulator (60 psi) --> Solenoid --> Prop. Control Assembly --> Accumulator --> Cylinder
Thanks for the input.
