|
Re: 5102's 3D Printed Shooter Prototype
Here's the part on printer. Printed in .2mm layer height, 2 shell thickness, and 10% infill. This one actually broke after 5 shots, when we tried using more surgical tubing.
The one in the video was printed at .2mm layer height, 5 shell thickness, and 20% infill. So far that one has held up well.
__________________
Alumnus FRC 973: 2010, 2011, 2012, 2013
2011 World Championship Winning Alliance Member
FLL Mentor and Competition Judge 2012-2015 Student-Mentor FRC 5102: 2014, 2015
Student-Mentor FRC 3925: 2015, 2016
FRC Ventura Regional Planning Committee Member & Regional Field Supervisor: 2015, 2016
|