|
Re: Raspberry Pi
Quote:
Originally Posted by NotInControl
Your configuration is acceptable and does not break any rules.
The bandwidth limit is only in effect if you are sending data off board from the robot to the driverstation, there is no bandwidth limit on the local network between the robot and the camera from the D-link switch, so unless you plan to stream the images back to the DS, vice just sending strings back, you need not worry about the bandwidth limit.
Also be sure, if you do plan to send data off board to the DS you can only use certain socket ports as defined in the manual.
hope this helps,
Kevin
|
Thanks! Just trying to make sure our setup is legal.
__________________
The higher I go up, the the faster the best times in my life (like build season) pass...so sad.
|