Quote:
Originally Posted by alexander.h
The PWMs are properly seated. We can still turn the drivetrain by ourselves. How can we tell if the DSC is properly powered (only 2 out of 3 LEDs are on). No, our motors aren't fighting against each other. Does that help?
|
I told you how to in your 2nd thread.
Quote:
Originally Posted by Joe Ross
I suspect that both this problem, and your previous talon problem both have the same root cause, not properly powering the Digital Sidecar.
Remove the DB-37 cable from the digital sidecar and verify that all 3 power LEDs on the Digital Sidecar are brightly lit. If they aren't, make sure the digital sidecar is powered from a 20amp circuit from the PDB.
|
By creating 3 different threads, and not following the advice in previous threads, you're making it harder to help and take longer to get to the root cause.