Quote:
Originally Posted by Paul Copioli
We have just sent 1,500 of the Versahubs with 1/4" bore to a machining house to be bored and broached, but here is the bad news: the only way to get fast turnaround on these part we need to rotary broach. What that means is the hex hole will not be oriented to the Versakey pattern. In my opinion, this does not matter because you only need one Versahub per shaft (see our diagrams on the product page). However, that is the best we have at the moment.
|
This would mean that the bolts are not aligned to the hex.