Hi folks,
I have been scouring the internet looking for the specs on the Denso PN E6DF-14A365-BB motor from FIRST Choice (
http://www.firstchoicebyandymark.com/en/fc14-068).
This is the one with the metal gear, not the typical plastic gear.
I did find an old model on
http://www.firstcadlibrary.com/ but I am unsure of its accuracy because the STEP model there has an 8 tooth gear and the real part has 9 teeth.
I also found that this was used on some year of Ford Taurus/Mercury Sable (thanks eBay).
What I really want to know is what the specs on the gear are (upon measurement it appears to be a 9 Tooth 12 DP gear) and if anyone has a drawing or model with the location of the holes from the center axis of the output shaft.
I am going to try to call Denso and see what I can find, but I am not holding my breath
Thanks for the help!
-matto-