|
Re: cRIO imaging tool hangs on "Rebooting cRIO"
Here's what I was able to figure out after a few hours of hitting my head against a wall:
1. Set cRio into safe mode, reboot.
2. Format the cRio, when the tool warns about safe mode choose "Format in Safe Mode" or whatever it says.
3. When finished, turn safe mode off and reboot.
4. Image it normally. It should work this time.
This worked perfectly for me. Good luck.
__________________
2013: Rookie year, programmer-in-training; SBPLI Regional Finalists
2014: Co-Captain, Programmer, Driver; Seeded 15th
2015: Co-Captain, Programmer, Driver
|