[quote=DevenStonow;1331383]
Quote:
Originally Posted by amesmich
28" inches is 28" regardless of whats on it, however they do say things that protrude out like nut ans bolts < than 1/4" are ok so I would bet it would be ok, but thats just my bet. I would think that if you asked they would say what I said in my first sentence.
/QUOTE]
In regards to this, previously, I've had the "issue"(ie. it wasn't really an issue) where the LRI further clarified that that rule is simply there in respect to your own FP-ie. if you're 27.5x27.5, those protrusions are okay, but if you're 28x28, they would NOT be okay, because (as said in other posts) 112 inches is 112 inches, so no matter what you still need to fit under the 112 inches-including protrusions.
Keep in mind, this was just one LRI's interpretation, but I assume it'd be fairly consistent across the board.
|
Well, that inspector is wrong. The rule says "Minor protrusions no greater than ¼ in. such as bolt heads, fastener ends, and rivets are not considered part of the FRAME PERIMETER." It's very clear.