|
Re: FRAME PERIMETER question
Per R2, your FRAME PERIMETER is defined by the outer most points in the bumper zone, ignoring minor protrusions such as bolt heads. So, if that bend is within in the bumper zone, then it defines your frame perimeter - you have to have your bumpers mounted so they are along the edge, and that edge counts towards the 112".
If that bend is NOT inside the bumper zone (it's above 10" or below 2"), then it is NOT legal, as it would be outside your frame perimeter during the start of the match.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|