|
Re: Bumper Mounting
If the brackets are part of your bumper system, then they are considered bumper.
R22
BUMPERS must be located entirely within the BUMPER ZONE, which is between two (2) and ten (10) in. from the floor, in reference to the ROBOT standing normally on a flat floor.
If they are part of the robot frame, then they will be considered in the Frame Perimeter size determination.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|