View Single Post
  #20   Spotlight this post!  
Unread 26-01-2014, 22:59
SoftwareBug2.0's Avatar
SoftwareBug2.0 SoftwareBug2.0 is offline
Registered User
AKA: Eric
FRC #1425 (Error Code Xero)
Team Role: Mentor
 
Join Date: Aug 2004
Rookie Year: 2004
Location: Tigard, Oregon
Posts: 485
SoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant futureSoftwareBug2.0 has a brilliant future
Re: More than one power distribution board

Quote:
Originally Posted by Alan Anderson View Post
The only thing specialized about the official Wago tool is the slippery coating that makes it a tiny bit easier to use than a standard small screwdriver. I typically use the kind that's often given away as a promotional item. (We're actually using a ground-down right-angle Allen wrench on our PDB this year because of a specific spacing issue in the robot.)

What does "intuitive" mean? Push the tool into the slot and the connector opens up. Pull it back out and the connector closes. I suppose you could break something if you got silly and tried to turn the handle while it was inserted, or if you tried to pry the plastic apart with it, but neither of those seem like an obvious thing to do.
By intuitive I mean that if you tell someone to do it with no further instructions they are likely to do it the right way. If people just naturally did it right the warnings on page 9 of this document would not be needed.

http://www.usfirst.org/sites/default...tion_Board.pdf